Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
Fordele
- Shallow drill hole depths and small drill hole diameters
- Cutting teeth at the fore of the anchor ensure minimal tightening torque
- No expansion effect, hence minimal spacing and edge distance
- Quick and simple in-place installation, can be easily inserted by mechanical means
- Immediate load-bearing capacity - no waiting
- Attachment can be fully removed again
- No torque control required
- Broad range of uses due to numerous versions
- Stylish look with countersunk hexagon head
Tekniske specifikationer
| Anchor length (l) | 90 mm |
| Anchor size | 10 |
| External drive | WS15 |
| Material | Stainless steel A4 |
| Max. recommended power output for setting tool | 450 Nm |
| Nominal drill-bit diameter (d 0) | 10 mm |
| Surface | Plain |
| Thread diameter | 12 mm |
| Washer diameter | 20.0 mm |
Forventet levering: 29.–30. sep.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
Screw anchor with hexagon head TSM LT 10x90 AF 15 A4
Drill - screw in - done The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
| Artikelnummer | 0900410090 |
| EAN | 4066115042089 |
| Pakkeenhed | pk (50 stk) |
| Anchor length (l) | 90 mm |
| Anchor size | 10 |
| External drive | WS15 |
| Material | Stainless steel A4 |
| Max. recommended power output for setting tool | 450 Nm |
| Leverandør | RECA NORM |
