Fordele

• Extremely rapid curing regardless of ambient moisture.
• Adheres to all conventional construction substrates except PE, silicone, release agent etc.
• Outstanding soundproofing and insulating properties.
• No pre-wetting required
• No expansion after curing
• No shrinkage

Gode råd

• The substrates must be stable, clean and free of dust, grease and release agent. The ideal application temperature is +20°C. Screw on the adapter. Turn the cross on the bottom of the can to the right as far as it can go. Hold the can with the valve downwards. Shake the can vigorously at least 30 times. Extrude the foam by pressing the lever. The foam should be of a consistent colour throughout. Shake again if necessary. Important: Can contents must be used within 2–3 min. after activation! (The can may otherwise overheat and burst.) Do not activate the can at temperatures above 25°C. When fitting door frames, brace the frames until the foam has cured. Remove any fresh splashes of foam immediately using PU universal cleaner. Hardened foam can only be removed mechanically.
• Please observe the safety instructions on the can and the information on the safety data sheet.
• Not UV-resistant!

Tekniske specifikationer