1 / 3
Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
Beskrivelse
Plug-in reversible ratchet with finely toothed reversible ratchet head. With trigger function. With pin detent on plug-in square drive. Chrome-plated.
Gode råd
- The maximum torque load of plug-in tools is based on DIN 899 and can be lower than the maximum torque of the tool used.
- The torque wrench must be inspected (calibrated) at specified intervals, as for every measuring tool.
- Calibration certificates are valid for a maximum of 12 months from the time of commissioning.
- If the tool is used frequently, this period should be reduced. A period should be specified after an assessment in line with DIN EN ISO 6789, section 5.3.2, after 5000 actuations.
Type
For tool chuck 14 x 18 mm
Tekniske specifikationer
| Head diameter | 43 mm |
| Height | 43 mm |
| Mount square | 14 x 18 mm |
| Tip size | 1/2 inch |
| Type | For tool chuck 14 x 18 mm |
| Weight | 260 g |
Forventet levering: 29.–30. sep.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
RECA push-fit ratchet 1/2" for torque wrench w. interch. sys. 14x18
Plug-in reversible ratchet with finely toothed reversible ratchet head. With trigger function. With pin detent on plug-in square drive. Chrome-plated.
| Artikelnummer | 0700502904 |
| EAN | 4029484521784 |
| Pakkeenhed | 1 stk |
| Head diameter | 43 mm |
| Height | 43 mm |
| Mount square | 14 x 18 mm |
| Tip size | 1/2 inch |
| Type | For tool chuck 14 x 18 mm |
| Leverandør | RECA NORM |
