RECA push-fit open-end spanner for torque wrench w. interch. sys. 9x12 mm/AF 17
Plug-in open-end wrench for torque wrench with 9 x 12 mm tool mount. With pin detent on plug-in square drive. Chrome-plated. Advice: The maximum torque load of plug-in tools is based on DIN 899 and can be lower than the maximum torque of the tool used. The torque wrench must be inspected (calibrated) at specified intervals, as for every measuring tool. Calibration certificates are valid for a maximum of 12 months from the time of commissioning.
| Artikelnummer | 0700502917 |
| EAN | 4029484520251 |
| Construction product | 0 - not applicable |
| Height | 8.5 mm |
| Mount square | 9 x 12 mm |
| Thickness | 20.0 mm |
| Weight | 50 g |
| Supplier | RECA NORM |
Plug-in open-end wrench for torque wrench with 9 x 12 mm tool mount.
With pin detent on plug-in square drive.
Chrome-plated.
Advice:
The maximum torque load of plug-in tools is based on DIN 899 and can be lower than the maximum torque of the tool used.
The torque wrench must be inspected (calibrated) at specified intervals, as for every measuring tool.
Calibration certificates are valid for a maximum of 12 months from the time of commissioning.
If the tool is used frequently, this period should be reduced. A period should be specified after an assessment in line with DIN EN ISO 6789, section 5.3.2, after 5000 actuations.
Alle varianter
RECA push-fit open-end spanner for torque wrench w. interch. sys. 9x12 mm/AF 10
RECA push-fit open-end spanner for torque wrench w. interch. sys. 9x12 mm/AF 13
RECA push-fit open-end spanner for torque wrench w. interch. sys. 9x12 mm/AF 15