1 / 2
Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
Beskrivelse
Plug-in open-end wrench for torque wrench with 9 x 12 mm tool mount. With pin detent on plug-in square drive. Chrome-plated.
Gode råd
- The maximum torque load of plug-in tools is based on DIN 899 and can be lower than the maximum torque of the tool used.
- The torque wrench must be inspected (calibrated) at specified intervals, as for every measuring tool.
- Calibration certificates are valid for a maximum of 12 months from the time of commissioning.
- If the tool is used frequently, this period should be reduced. A period should be specified after an assessment in line with DIN EN ISO 6789, section 5.3.2, after 5000 actuations.
Tekniske specifikationer
| Height | 7.0 mm |
| Mount square | 9 x 12 mm |
| Thickness | 17.5 mm |
| Weight | 35 g |
| Width | 30.0 mm |
| Width across flats | 13 mm |
Forventet levering: 29.–30. sep.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
RECA push-fit open-end spanner for torque wrench w. interch. sys. 9x12 mm/AF 13
Plug-in open-end wrench for torque wrench with 9 x 12 mm tool mount. With pin detent on plug-in square drive. Chrome-plated.
| Artikelnummer | 0700502913 |
| EAN | 4029484520220 |
| Pakkeenhed | 1 stk |
| Height | 7.0 mm |
| Mount square | 9 x 12 mm |
| Thickness | 17.5 mm |
| Weight | 35 g |
| Width | 30.0 mm |
| Leverandør | RECA NORM |
