Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
Dry walling, interior finishing
High-quality bit spacer with aluminium sleeve and strong permanent magnet for use in dry walling and interior construction. The screw depth can be adjusted continuously and allows screws to be countersunk until flush. The rear aluminium ring can be used to "lock" the configured position. As a result, the screw depth is not adjusted.
Fordele
- An O-ring is located in the front aluminium sleeve. This prevents the ingress of dust into the chuck. As a result, it takes a little more effort to insert the bit into the chuck.
- The best way is to remove the front aluminium sleeve, insert the bit into the chuck and screw the sleeve back on.
Gode råd
- Suitable for 1/4 inch bits with hexagon head drive.
- Suitable for power screwdrivers with a chuck conforming to DIN ISO 1173-F6.3.
with magnet
Tekniske specifikationer
| Adapter type | 1/4 inch, E 6.3 |
| Drive | 1/4 inch |
| Length | 50.0 mm |
| Type | with magnet |
Forventet levering: 10.–11. nov.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
RECA drywall bit holder 1/4 inch
High-quality bit spacer with aluminium sleeve and strong permanent magnet for use in dry walling and interior construction. The screw depth can be adjusted continuously and allows screws to be countersunk until flush. The rear aluminium ring can be used to "lock" the configured position. As a result, the screw depth is not adjusted.
| Artikelnummer | 0702880060 |
| EAN | 4029484828524 |
| Pakkeenhed | 1 stk |
| Adapter type | 1/4 inch, E 6.3 |
| Drive | 1/4 inch |
| Length | 50.0 mm |
| Type | with magnet |
| Leverandør | RECA NORM |
