1 / 10
Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
Field of Application
Materialer
- Træ
- Universal anvendelse
Universal use, interior finishing, construction of roofs, furniture and prefabricated elements. Wherever chipboard screws and timber screws are used.
Beskrivelse
Diameter 3.0 mm-10.0 mm
Fordele
- European Technical Approval ETA–12/0373. From diameter 4.0 mm
- HiLo thread — reduced screw-in times and high technical values
- Friction part for lower screw-in resistance and longer battery life for screw-in units
- Patented tip with ridged core for precise and immediate application and reduced splitting effect
- Countersunk milling pocket head makes for fast, clean countersinking and prevents the wood from splitting.
- Fewer bit changes — one drive size for dia. 3.5–5.0 mm, TX 20
- Additional drive size for dia. 5 mm, TX 25 for carpentry
- Premium Yellwin 500+ surface. Up to ten-times greater corrosion protection in comparison to standard zinc-plated coatings on the market (iridescent blue)
Gode råd
- Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Tekniske specifikationer
| Approval | ETA-12/0373 |
| End milling cutter | Yes |
| Head diameter | 10 mm |
| Head type | Countersunk milling pocket head |
| Internal drive | TX20 |
| Length | 80 mm |
| Material | Steel |
| Nominal diameter | 5 mm |
| Surface | Zinc plated thick-layer passivation |
| Thread design | Partial thread |
| Thread form | Hilo, double start |
| Thread length (thread for woodwork) | 50 mm |
| Thread type | Wood screw thread |
På lager
RAPID timber screw, milling pocket head, Yellwin 500+, PT, TX 20 5.0x80/50
Diameter 3.0 mm-10.0 mm
| Artikelnummer | 0160150080 |
| EAN | 4029484928217 |
| Pakkeenhed | pk (200 stk) |
| Approval | ETA-12/0373 |
| End milling cutter | Yes |
| Head diameter | 10 mm |
| Head type | Countersunk milling pocket head |
| Internal drive | TX20 |
| Leverandør | RECA NORM |