1 / 10
Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
Field of Application
Materialer
- Træ
- Universal anvendelse
Universal use, interior finishing, construction of roofs, furniture and prefabricated elements. Wherever chipboard screws and timber screws are used.
Beskrivelse
Diameter 3.0 mm-10.0 mm
Fordele
- European Technical Approval ETA-12/0373. From diameter 4.0 mm
- HiLo thread - reduced screw-in times and high technical values
- Patented tip with ridged core for precise and immediate application and reduced splitting effect
- Milling pocket head makes for fast, clean countersinking and prevents the wood from splitting.
- Fewer bit changes - one drive size for diameters of 3.5 to 5.0 mm, TX 20
- Additional drive size for a diameter of 5 mm, TX 25 for carpentry
- Premium surface Yellwin 500+. Up to ten-times greater corrosion protection in comparison to standard zinc-plated coatings on the market (iridescent blue)
Gode råd
- Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Tekniske specifikationer
| Approval | ETA-12/0373 |
| End milling cutter | No |
| Head diameter | 9 mm |
| Head type | Countersunk milling pocket head |
| Internal drive | TX20 |
| Length | 60 mm |
| Material | Steel |
| Nominal diameter | 4.5 mm |
| Surface | Zinc plated thick-layer passivation |
| Thread design | Partial thread |
| Thread form | Hilo, double start |
| Thread length (thread for woodwork) | 40 mm |
| Thread type | Wood screw thread |
Forventet levering: 10.–11. nov.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
RAPID timber screw, milling pocket head, Yellwin 500+, PT, TX 20 4.5x60/40
Diameter 3.0 mm-10.0 mm
| Artikelnummer | 0160145060 |
| EAN | 4029484928101 |
| Pakkeenhed | pk (200 stk) |
| Approval | ETA-12/0373 |
| End milling cutter | No |
| Head diameter | 9 mm |
| Head type | Countersunk milling pocket head |
| Internal drive | TX20 |
| Leverandør | RECA NORM |