1 / 10

Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.

Field of Application
Materialer
  • Træ
  • Universal anvendelse

Universal use, interior finishing, construction of roofs, furniture and elements, structural wood construction, over-rafter insulation. Wherever chipboard screws and timber screws are used.

Beskrivelse

Diameter 3.0 mm-10.0 mm

Fordele

  • European Technical Approval ETA–12/0373. From diameter 4.0 mm
  • HiLo thread — reduced screw-in times and high technical values
  • Friction part for lower screw-in resistance and longer battery life for screw-in units
  • Patented tip with ridged core for precise and immediate application and reduced splitting effect
  • Countersunk milling pocket head makes for fast, clean countersinking and prevents the wood from splitting.
  • Fewer bit changes — one drive size for dia. 3.5–5.0 mm, TX 20
  • Additional drive size for dia. 5 mm, TX 25 for carpentry
  • Premium Yellwin 500+ surface. Up to ten-times greater corrosion protection in comparison to standard zinc-plated coatings on the market (iridescent blue)

Gode råd

  • Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.

Tekniske specifikationer

ApprovalETA-12/0373
End milling cutterYes
Head diameter15 mm
Head typeCountersunk milling pocket head
Internal driveTX40
Length140 mm
MaterialSteel
Nominal diameter8 mm
SurfaceZinc plated thick-layer passivation
Thread designPartial thread
Thread formHilo, double start
Thread length (thread for woodwork)80 mm
Thread typeWood screw thread

Forventet levering: 10.–11. nov.

Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag

RAPID timber screw, c/s milling pocket head, Yellwin 500+, PT, TX 40 8.0x140/80

Diameter 3.0 mm-10.0 mm

Artikelnummer0160208140
EAN4029484928583
Pakkeenhedpk (75 stk)
ApprovalETA-12/0373
End milling cutterYes
Head diameter15 mm
Head typeCountersunk milling pocket head
Internal driveTX40
LeverandørRECA NORM