1 / 10

Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.

Field of Application
Materialer
  • Træ
  • Universal anvendelse

Universal use, interior finishing, construction of roofs, furniture and prefabricated elements, structural timber work. Wherever chipboard screws and timber screws are used.

Beskrivelse

Diameter 3.0 mm-10.0 mm

Fordele

  • European Technical Assessment (ETA-12/0373). From diameter 4.0 mm
  • HiLo thread - reduced screw-in times and high technical values
  • Patented friction part for lower screw-in resistance and longer battery life for screw-in units
  • Patented tip with ridged core for precise and immediate application and reduced splitting effect
  • Milling pocket head provides fast, clean countersinking and prevents the wood from splitting.
  • Fewer bit changes - one drive size for dia. 3.5-5.0 mm (TX20)
  • Additional drive size for dia. 5 mm (TX 25 carpentry)
  • Premium surface Yellwin 500+. Up to ten-times greater corrosion protection in comparison to standard zinc-plated coatings on the market (iridescent blue)

Gode råd

  • Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.

Tekniske specifikationer

ApprovalETA-12/0373
End milling cutterYes
Head diameter15 mm
Head typeCountersunk milling pocket head
Internal driveTX40
Length100 mm
MaterialSteel
Nominal diameter8 mm
SurfaceZinc plated thick-layer passivation
Thread designPartial thread
Thread formHilo, double start
Thread length (thread for woodwork)60 mm
Thread typeWood screw thread

Forventet levering: 10.–11. nov.

Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag

RAPID timber screw, c/s milling pocket head, Yellwin 500+, PT, TX 40 8.0x100/60

Diameter 3.0 mm-10.0 mm

Artikelnummer0160208100
EAN4029484928569
Pakkeenhedpk (75 stk)
ApprovalETA-12/0373
End milling cutterYes
Head diameter15 mm
Head typeCountersunk milling pocket head
Internal driveTX40
LeverandørRECA NORM