1 / 3

Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.

Application area
Materialer
  • Beton

For securing balcony balustrades, lattices, beams, brackets, metal structures, formwork supports, cable conduits, pipes, mounting rails, ventilation ducts, suspended ceilings, sprinkler systems, etc. to normal weight concrete with a concrete compressive strength of at least C20/25 and up to maximum C50/60.

Beskrivelse

Setting tools for MMS-TC beam anchors The setting tools are used for installing the Timber Connect concrete screw anchors. The concrete screw anchor is an innovative anchoring system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the concrete screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.

Fordele

  • Shallow drill hole depths and small drill hole diameters
  • Cutting teeth at the fore of the anchor ensure minimal tightening torque
  • No expansion effect, hence minimal spacing and edge distance
  • Quick and simple in-place installation, can be easily inserted by mechanical means
  • Immediate load-bearing capacity - no waiting
  • Fastening can be fully removed again
  • No torque control required

Gode råd

  • The red rubber ring is used to mark the correct length of thread engagement.

Tekniske specifikationer

ApprovalNo
MaterialSteel
Surface0 - not applicable

Forventet levering: 29.–30. sep.

Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag

MULTI-MONTI MMS-TC TimberConnect setting tool, hardened steel, TX45 T45x195

Setting tools for MMS-TC beam anchors The setting tools are used for installing the Timber Connect concrete screw anchors. The concrete screw anchor is an innovative anchoring system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the concrete screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.

Artikelnummer0901591045
EAN4029484806157
Pakkeenhed1 stk
ApprovalNo
MaterialSteel
Surface0 - not applicable
Type descriptionSetting tool T-45 for MMS-TC 10
LeverandørRECA NORM