Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
- Træ
- Beton
- Murværk og tegl
For fastening façade constructions made of wood and metal, window and door frames, fire doors, gates, metal brackets, rails, consoles, hanging cabinets, panels, frames, square timbers on concrete, solid brick, solid sand-lime brick, solid brick made of lightweight concrete, aerated concrete, vertically perforated brick, hollow sand-lime brick, hollow block made of lightweight concrete, pre-stressed concrete hollow plates, etc.
Countersunk anchor with countersunk head screw The MFR multi-function frame anchor is designed for universal mounting of façade substructures and attachments made of wood and metal in many common substrates. Different anchor and screw geometries allow for a variety of different applications. Due to the special dowel construction, the MFR with a diameter of 10 mm can be inserted with a reduced setting depth of 50 mm or with the standard setting depth of 70 mm.
Fordele
- Approved for use in concrete, masonry, aerated concrete and reinforced aerated concrete*
- Available with dia. 8 mm and 10 mm
- Two setting depths for greater flexibility (dia. 10 mm)*
- Lengths: 60 mm–320 mm
- Patented quadruple expansion for a secure fit
- Immediate load-bearing capacity — no waiting
- Very versatile
- Extensive product range
- The anchor and screw are pre-assembled
- Fire protection R90 (see "Approval")
- Tested and approved by Hörmann for fire doors in solid construction materials*
- * Note the types and dimensions
Gode råd
- Drill into perforated stone and aerated concrete by turning only, no hammer action.
Tekniske specifikationer
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 115 mm |
| Anchor length (l) | 115 mm |
| Approval | ETA |
| Attachment height (t fix 1) | 70 mm |
| Attachment height (t fix 2) | 50 mm |
| Drill hole depth (h 1) | 80 mm |
| Embedding depth (h nom1) | 50 mm |
| Embedding depth (h nom2) | 70 mm |
| Internal drive | TX40 |
| Material | PA 6 - Polyamide |
| Material of screw | Stainless steel A4 |
| Nominal drill hole diameter | 10 mm |
| Screw diameter (ds) | 7 mm |
| Through-hole in the component to be connected (d f) | 10.5 mm |
Forventet levering: 29.–30. sep.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
MFR SB TX multi-function frame anchor, c/sunk anchor, st. steel A4, 10 x 115 mm
Countersunk anchor with countersunk head screw The MFR multi-function frame anchor is designed for universal mounting of façade substructures and attachments made of wood and metal in many common substrates. Different anchor and screw geometries allow for a variety of different applications. Due to the special dowel construction, the MFR with a diameter of 10 mm can be inserted with a reduced setting depth of 50 mm or with the standard setting depth of 70 mm.
| Artikelnummer | 0905965120 |
| EAN | 4029484914296 |
| Pakkeenhed | pk (50 stk) |
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 115 mm |
| Anchor length (l) | 115 mm |
| Approval | ETA |
| Attachment height (t fix 1) | 70 mm |
| Leverandør | RECA NORM |