1 / 5
Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
Beskrivelse
The universal model Twist drill with straight shank, short, DIN 338, type N, right-hand cutting, HSS-O
Fordele
- Ideal for power tools
- Reduced chip warping: Reduced power consumption and less frictional heat
- Utilizes 100% of the output of power toolsTop quality
- Long service life
- Elasticity according to the most recent findings
- Optimised breakage resistance with all diameters
- Can be regroundTurbo cutter
- 50% faster than conventional twist drills owing to tip angle of 135°
- No centre punch required
- Drills all conventional materials in the trade sector such as steel, stainless steel, aluminium, brass, copper, plasticsCoating
- The multifunctional steam oxide (Fe2 O4) coating is an adhesive oxide coating with a thickness of 0.010 mm and offers the following advantages:
- Improved adhesion of cooling lubricant on the drill surface prevents built-up edges and cold shuts.
- Improves chip discharge from the cutter - reduced heat development in the critical zone.
- Increased surface hardness - thus improved wear resistance.
Gode råd
- From ø 13.5 mm shaft twisted off to ø 12.7 mm
Tekniske specifikationer
| Chip flute length | 47.0 mm |
| Diameter | 4.5 mm |
| Length | 80.0 mm |
Forventet levering: 29.–30. sep.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
HSS-O ultra twist drill, 4.5 mm
The universal model Twist drill with straight shank, short, DIN 338, type N, right-hand cutting, HSS-O
| Artikelnummer | 062045 |
| EAN | 4029484253265 |
| Pakkeenhed | pk (10 stk) |
| Chip flute length | 47.0 mm |
| Diameter | 4.5 mm |
| Length | 80.0 mm |
| Leverandør | RECA NORM |
