Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
- Stål
- Rustfrit stål
- Kobber
- Messing og bronze
- Ikke-jernmetal
Shoulder-free matting, line matting, satin finish and removal of dirt and oxide layers on stainless steel, steel and non-ferrous base metals. Depending on the material used, it is possible to achieve a wide variety of matt and semi-gloss effects on steel, chrome steel, copper, brass, light metal and other materials.
Fordele
- A better sanding effect is achieved by using additional abrasive cloth between the non-woven abrasive
- Mixed corundum made from corundum and synthetic corundum
- Synthetic resin-bonded flaps, attached radially to the axis
Gode råd
- Please note: Pay attention to the direction of rotation!
- Tools are only suitable for clockwise rotation!
At high rotation speeds, a coarse grain acts like a finer grain and at low rotation speeds a fine grain acts like a coarser grain. Use tools with a low contact pressure; high contact pressure and sharp edges lead to premature wearing. If chip removal is insufficient, do not increase the contact pressure, but instead use a coarser grain.
Tekniske specifikationer
| Adapter diameter | 6 mm |
| Diameter | 80.0 mm |
| Grid size | 180/150 |
| Max. rotation speed | 7000 rpm |
| Recommended rotation speed | 4000 rpm |
| Width | 50.0 mm |
Forventet levering: 29.–30. sep.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
Flap wheel w/shaft combined abrasive cloth and non-woven material 80x50x6mm
Field of Application: Shoulder-free matting, line matting, satin finish and removal of dirt and oxide layers on stainless steel, steel and non-ferrous base metals. Depending on the material used, it is possible to achieve a wide variety of matt and semi-gloss effects on steel, chrome steel, copper, brass, light metal and other materials.
| Artikelnummer | 0675180506 |
| EAN | 4029484298778 |
| Pakkeenhed | pk (5 stk) |
| Adapter diameter | 6 mm |
| Diameter | 80.0 mm |
| Grid size | 180/150 |
| Max. rotation speed | 7000 rpm |
| Recommended rotation speed | 4000 rpm |
| Leverandør | RECA NORM |
