Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
- Plast
- Beton
- Natursten
Diamond grinding cups are used for machining the surface of stone and concrete materials. Can be used in commercially available angle grinders or in special concrete grinders that are equipped with enclosed extraction devices (e.g. BOSCH GBR 14CA). For removing formwork residues, concrete projections, paint, graffiti, tar coatings and even thin plastic coverings (up to approx. 3 mm)
Can be used on screed, sandstone and other abrasive materials. Thanks to the three holes in the mount, the diamop RS10A can be used on special floor sanding machines, such as those from Früh.
Screed, abrasive
Tekniske specifikationer
| Bore diameter | 22.2 mm |
| Diameter | 125 mm |
| Material to be processed | Screed, abrasive |
| Overall height | 22 mm |
| Segment height | 7 mm |
| Type | Screed, abrasive |
| Weight | 495 |
Forventet levering: 29.–30. sep.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
diamop diamond grinding cup AERO RS10A single pack, 125/22.2
Can be used on screed, sandstone and other abrasive materials. Thanks to the three holes in the mount, the diamop RS10A can be used on special floor sanding machines, such as those from Früh.
| Artikelnummer | 0662603125 |
| EAN | 4029484449798 |
| Pakkeenhed | 1 stk |
| Bore diameter | 22.2 mm |
| Diameter | 125 mm |
| Material to be processed | Screed, abrasive |
| Overall height | 22 mm |
| Segment height | 7 mm |
| Leverandør | RECA NORM |
