Countersunk head screws, ISO 10642 A2-70, hexagon socket 6 M10 x 30
Hexagon socket countersunk head screws Due to their head geometry, countersunk head screws have a limited load capacity according to this standard and may not meet the requirements for tensile or torsional strength. The actual mechanical properties of the screw are unchanged and comply with ISO 3506-1. Depending on the type, these items are supplied with threading almost up to the head.
| Artikelnummer | 010010 30 |
| EAN | 4029484030620 |
| Construction product | 0 - not applicable |
| Head diameter | 20.69 mm |
| Head height | 6.2 mm |
| Head type | Countersunk head |
| Internal drive | HS6 |
| Supplier | RECA NORM |
Hexagon socket countersunk head screws
Due to their head geometry, countersunk head screws have a limited load capacity according to this standard and may not meet the requirements for tensile or torsional strength. The actual mechanical properties of the screw are unchanged and comply with ISO 3506-1.
Depending on the type, these items are supplied with threading almost up to the head.
Countersinks for screw heads in accordance with DIN 7991 and ISO 10642 must comply with DIN 74 type F
Advice:
DIN 7991 has been withdrawn and replaced by ISO 10642. There is some limited similarity (Some head heights and head diameters changed | Nominal diameter M18, M22, M24 removed | Stainless steels removed | Strength classes 10.9 and 12.9 added).Due to their head geometry, these screws can only be subjected to limited loads, see DIN EN ISO 3506-1
Alle varianter
Countersunk head screws, ISO 10642 A2-70, hexagon socket 6 M10 x 100
Countersunk head screws, ISO 10642 A2-70, hexagon socket 6 M10 x 20
Countersunk head screws, ISO 10642 A2-70, hexagon socket 6 M10 x 25