Opdaterede produktoplysninger. Vi gennemgår alle beskrivelser i kataloget. Anvendelsesområde og de anførte materialer kan være forkerte, mens vi fastlægger de korrekte materialer for alle artikler. Er du i tvivl, så spørg din kontaktperson hos A4.
- Stål
- Træ
- Beton
For anchoring medium to heavy loads in cracked and uncracked concrete: Supports, steel beams, railing fastenings, cable conduits, pipe conduits, timber constructions, brackets, stadium seating, fastenings in earthquake regions and similar Load range: 2.4 kN-43.9 kN Concrete grade: C20/25-C50/60
For quick and reliable anchoring of medium to heavy loads in cracked and uncracked concrete The BZ plus A4 stud anchor is a torque-controlled anchor for quick in-place installation. When the hexagon nut is tightened, the stud is pulled into the expansion clip and clamps it effectively against the drill hole wall. The special coating on the hexagon nut effectively prevents cold welding to the bolt thread.
Fordele
- High permissible loads, low spacing and edge distance
- NEW: BZ plus A4 70M12 with 33 % higher permissible tensile loads - for details, see European Technical Approval ETA-99/0010
- Quick and easy in-place installation
- Immediate load-bearing capacity - no waiting
- The special coating on the nut effectively prevents cold welding between nut and bolt thread.
- The plastic-covered cone guarantees subsequent expansion if cracks form in the concrete.
- Two effective anchorage depths for greater flexibility
Tekniske specifikationer
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 130 mm |
| Anchor length (l) | 130 mm |
| Drill hole depth (h 1) | 75 mm |
| Drill hole depth reduced (h 1, red) | 55 mm |
| Effective anchoring depth (h ef) | 60 mm |
| Effective anchoring depth reduced (h ef, red) | 40 mm |
| Embedding depth (h nom,red) | 48 mm |
| Embedding depth (h nom) | 68 mm |
| Material | Stainless steel A4 |
| Max. attachment height (t fix) | 50 mm |
| Max. attachment height reduced (t fix, red) | 70 mm |
| Minimum component thickness (h min) | 100 mm |
| Minimum component thickness for reduced anchoring depth (h m | 80 mm |
| Nominal drill-bit diameter (d 0) | 10 mm |
| Surface of the nut | Dark slide coating |
| Thread diameter | 10 mm |
| Thread diameter x thread length (metric thread) | 10 x 86 mm |
| Thread length (metric thread) | 86 mm |
| Through-hole in the component to be connected (d f) | 12 mm |
| Torque during anchoring (T inst) | 35 Nm |
| Width across flats | 17 mm |
Forventet levering: 29.–30. sep.
Bestil senest onsdag kl. 23:59 · bestillingen sendes til Reca torsdag
BZ plus stud anchor A4 M10 x 50-70/130
For quick and reliable anchoring of medium to heavy loads in cracked and uncracked concrete The BZ plus A4 stud anchor is a torque-controlled anchor for quick in-place installation. When the hexagon nut is tightened, the stud is pulled into the expansion clip and clamps it effectively against the drill hole wall. The special coating on the hexagon nut effectively prevents cold welding to the bolt thread.
| Artikelnummer | 0910510130 |
| EAN | 4029484741793 |
| Pakkeenhed | pk (50 stk) |
| Anchor diameter | 10 mm |
| Anchor diameter x anchor length (l) | 10 x 130 mm |
| Anchor length (l) | 130 mm |
| Drill hole depth (h 1) | 75 mm |
| Drill hole depth reduced (h 1, red) | 55 mm |
| Leverandør | RECA NORM |
